RANGE OF PERFORMANCE |
Flow rate up to 132 gpm
Head up to 49 ft |
LIMITS OF USE |
Depth up to 15 ft
Liquid temperature up to 104°f
Passage of suspended solid bodies up to 2”
For continuous duty: minimum immersion 11” from pump base |
INSTALLATION AND USE |
THEY ARE RECOMMENDED FOR DOMESTIC, CIVIL AND INDUSTRIAL USE, IN APPLICATIONS WHERE THE WATER CONTAINS SUSPENDED SOLIDS WITH DIMENSIONS UP TO Ø 2 plg.
THEIR USE IS RECOMMENDED FOR DRYING FLOODED AREAS SUCH AS CELLARS, UNDERGROUND CAR PARKS, CAR WASHING AREAS, OR DOMESTIC DRAINS AND FOR EMPTYING CESSPITS OR SEWAGE DISPOSAL. THESE PUMPS ARE OUTSTANDING IN THEIR RELIABILITY IN FIXED INSTALLATIONS WITH AUTOMATIC
OPERATION. |
|
|
CONSTRUCTION CHARACTERISTICS |
• DELIVERY BODY: cast iron, with threaded port
• MOTOR CASING: stainless steel AISI 304.
• Base: stainless steel AISI 304.
• IMPELLER: stainless steel AISI 304.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• MOTOR: submersible asynchronous for continuous duty.
VX: single-phase 115 V or 230V - 60 Hz with capacitor and
thermal overload protector.
VX: three-phase 230V - 60 Hz.
• INSULATION: class F.
• PROTECTION: IP 68.
• STANDARD FEATURES:
VX (single-phase) Float switch.
Neoprene power cable “H07 RN-F”
length 15 ft.
VX (three-phase) Neoprene power cable “H07 RN-F”
length 15 ft. |
OPTIONS ON REQUEST |
• 30 ft power cable.
N.B. required for outdoor use to comply to standard EN 60335-2-41
• control panel for three-phase pumps 1 Hp
• single-phase pumps without float switch
• other voltages or frequency 50 Hz |
|
![.](images/spacer.gif"){kind=spacer}
