RANGE OF PERFORMANCE |
Flow rate up to 34 gpm
Head up to 296 ft |
LIMITS OF USE |
Manometric suction lift up to 23 ft
Liquid temperature up to 104°f |
INSTALLATION AND USE |
They are recommended for pumping clean water and liquids that are chemically non aggressive to the materials from which the pump is made.
THEIR RELIABILITY AND QUIET RUNNING MAKE THEM SUITABLE FOR DOMESTIC AND CIVIL APPLICATIONS, BECAUSE THE PUMP IS FULLY SUBMERSIBLE WITH THE MOTOR COOLED BY THE
PUMPED LIQUID, IT CAN BE USED SAFELY IN WET
ENVIRONMENTS AND IN SPACES WITH INSUFFICIENT VENTILATION. |
|
|
CONSTRUCTION CHARACTERISTICS |
• OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304 case with threaded ports.
• IMPELLERS AND DIFFUSERS: technopolymer.
• DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• SCREWS: stainless steel AISI 304.
• MOTOR: electric, asynchronous for continuous duty.
VL 25G: single-phase 230V - 60 Hz with thermal overload protector built into windings below 1.5 Hp. The 2 Hp motor has an external overload protector (with manual reset) incorporated into the control box.
VL 25G: three-phase 230V - 60 Hz.
• INSULATION: class F.
• PROTECTION: IP68.
• STANDARD FEATURES:
VL 25G (single-phase ) 6 ft power cable type
“H07 RN-F” with removable connector.
Control box with capacitor.
VL 25G (three-phase ) 6 ft power cable type
“H07 RN-F” with removable connector |
OPTIONS ON REQUEST |
| •other voltages or frequency 50 Hz |
|
![.](images/spacer.gif"){kind=spacer}
