RANGE OF PERFORMANCE |
Flow rate up to 105 gpm
Head up to 48 ft |
LIMITS OF USE |
Depth up to 16 ft (10 ft up to 0.55 Hp)
Liquid temperature up to 104°f
(+194°f for a maximum period of 3 minutes)
Passage of solid bodies up to 4/10”
Drainage level:
1/2” from the bottom for TOP up to 0.5 Hp
1 1/16” from the bottom for TOP 0.7 and 1.0 Hp |
INSTALLATION AND USE |
THE TTOOPP SERIES IS SUITABLE FOR DRAINING CLEAR WATER WITHOUT ABRASIVE PARTICLES. THE CONSTRUCTION GUARANTEES SIMPLE AND SAFE OPERATION DUE TO THE COMPLETE COOLING OF THE MOTOR BY THE PUMPED WATER AND THE DOUBLE SEAL DESIGN. THEY ARE RECOMMENDED FOR EMERGENCY DRAINING OF SMALL FLOODED AREAS (ROOMS, CELLARS, GARAGES), FOR THE DISPOSAL OF WASTE
WATER IN THE HOME (DISHWASHER, WASHING MACHINE) AND FOR EMPTYING DRAINAGE TRAPS. |
|
|
CONSTRUCTION CHARACTERISTICS |
• DELIVERY BODY: glass filled technopolymer, particularly resistant to
impact and corrosion, with threaded port.
• SUCTION GRID: technopolymer.
• IMPELLER: open type in technopolymer.
• MOTOR SUPPORT: stainless steel AISI 304.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• DOUBLE SEAL: mechanical seal ceramic -graphite - NBR, with oil barrier
chamber and inner lip seal to protect the seal in the event of dry running.
• MOTOR: submersible asynchronous single-phase for continuous duty.
TOP: single-phase 115 V or 230 V - 60 Hz with capacitor and thermal overload protector built into the winding.
• INSULATION: class F.
• PROTECTION: IP 68.
• REGISTERED MODEL nº 72765.
• STANDARD FEATURES:
TOP up to 0.5 Hp (single-phase) Float switch.
Hosetail.
Power cable in neoprene “H05 RN-F”
length 15 ft
TOP 0.7 and 1 Hp (single-phase) Float switch.
• Hosetail.
• Coupling with flap valve.
Neoprene power cable “H05 RN-F” length 30 feet. |
OPTIONS ON REQUEST |
• pumps for aggressive liquids TOP - LA
• special mechanical seal
• 30 ft power cable.
N.B. required for outdoor use to comply with standard EN 60335-2-41
• versions without float switch
• other voltages or frequency 50 Hz |
|