RANGE OF PERFORMANCE |
Flow rate up to 58 gpm
Head up to 29 ft |
LIMITS OF USE |
Depth up to 10 ft
Liquid temperature up to 104°f
(194°f for a maximum period of 3 minutes)
Drainage level 1/8” from the bottom |
INSTALLATION AND USE |
THE TOP-FLOOR SERIES IS SUITABLE FOR DRAINING CLEAR WATER WITHOUT ABRASIVE PARTICLES. THEIR ABILITY TO DRAIN WATER DOWN TO 1/8” FROM THE FLOOR MAKES THEM
IDEAL FOR EMERGENCY DOMESTIC USE FOR SMALL FLOODED AREAS AND IN ALL THOSE APPLICATIONS WHERE MAXIMUM DRAINAGE IS REQUIRED. |
|
|
CONSTRUCTION CHARACTERISTICS |
• DELIVERY BODY: glass filled technopolymer, particularly resistant
to impact and corrosion, with threaded port.
• SUCTION GRID: technopolymer.
• IMPELLER: open type in technopolymer.
• MOTOR SUPPORT: stainless steel AISI 304.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• DOUBLE SEAL: mechanical seal ceramic - graphite - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• MOTOR: submersible asynchronous single-phase for continuous duty.
TOP-FLOOR: single-phase 115 V or 230 V - 60 Hz with capacitor and
thermal overload protector.
• INSULATION: class F.
• PROTECTION: IP 68.
• REGISTERED MODEL nº 72765
• STANDARD FEATURES:
TOP-FLOOR Neoprene power cable “H05 RN-F”
length 15 ft
Hosetail. |
INSTALLATION AND USE |
• versions with external float switch
• special mechanical seal
• 30 ft power cable.
N.B. required for outdoor use to comply with standard EN 60335-2-41
• other voltages or frequency 50 Hz
|
|
![.](images/spacer.gif"){kind=spacer}
