RANGE OF PERFORMANCE |
Flow rate up to 34 gpm
Head up to 296 ft |
LIMITS OF USE |
Liquid temperature up to 104°f
Submersion depth up to 65 ft |
INSTALLATION AND USE |
THEIR HIGH EFFICIENCY AND RELIABILITY MAKE THEM SUITABLE FOR PUMPING CLEAN WATER IN COMMERCIAL, CIVIL AND AGRICULTURAL APPLICATIONS, FOR DISTRIBUTING WATER
IN COMBINATION WITH PRESSURE SETS, FOR IRRIGATING GARDENS, BOOSTING PRESSURE, ETC. |
|
|
CONSTRUCTION CHARACTERISTICS |
• OUTER CASE AND MOTOR SUPPORT: stainless steel AISI 304
• IMPELLERS AND DIFFUSERS: technopolymer.
• DIAPHRAGMS: stainless steel AISI 304, complete with anti-wear rings.
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• DOUBLE SEAL: mechanical seal silicon carbide-NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• SCREWS AND FILTER: stainless steel AISI 304.
• MOTOR: asynchronous for continuous duty.
SUMO 25G: single-phase 230V - 60 Hz with thermal overload protector built into windings below 1.5 Hp. The 2 Hp motor has an external overload protector (with manual reset) incorporated into the control box.
SUMO 25G: three-phase 230V - 60 Hz.
• INSULATION: class F.
• PROTECTION: IP 68.
• STANDARD FEATURES:
SUMO 25G (single-phase) Control box with capacitor
70 ft power cable type “H07 RN-F” with removable
connector and Schuko plug.
SUMO 25G (three-phase) 70 ft power cable type
“H07 RN-F” with removable connector. |
OPTIONS ON REQUEST |
• economy version 30 ft power cable and capacitor, (without control box)
• single-phase pumps with external float switch (SUMO 25G...- GE)
• other voltages or frequency 50 Hz |
|
![.](images/spacer.gif"){kind=spacer}
