RANGE OF PERFORMANCE |
Flow rate up to 105 gpm
Head up to 88 ft |
LIMITS OF USE |
Depth up to 15 ft
Liquid temperature up to 104°f
Passage of suspended solid bodies up to 3/8”
Drainage level 1/2” from the bottom
For continuous duty: minimum immersion 8.5” from pump base |
INSTALLATION AND USE |
DESIGNED FOR DRAINING CLEAR OR SLIGHTLY DIRTY WATER WITH SMALL SOLIDS, THEY ARE RECOMMENDED FOR DOMESTIC, CIVIL AND PROFESSIONAL USE, FOR DRAINING FLOODED AREAS SUCH AS CELLARS AND GARAGES OR FOR
EMPTYING SWIMMING POOLS OR TANKS AND FOR DISPOSING OF NON-SEWAGE WASTE WATER. THESE PUMPS ARE OUTSTANDING IN THEIR RELIABILITY IN FIXED INSTALLATIONS WITH AUTOMATIC OPERATION. |
|
|
CONSTRUCTION CHARACTERISTICS |
• DELIVERY BODY: cast iron, with threaded port ISO 228/1.
• MOTOR CASING: stainless steel AISI 304.
• SUCTION GRID: stainless steel AISI 304.
• IMPELLER: open type, in glass filled technopolymer
• MOTOR SHAFT: stainless steel EN 10088-3 - 1.4104.
• DOUBLE SEAL: mechanical seal silicon carbide - NBR, with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• MOTOR: submersible asynchronous for continuous duty.
D: single-phase 115 V or 230 V - 60 Hz with capacitor and thermal overload protector.
D: three-phase 230V - 60 Hz.
• INSULATION: class F.
• PROTECTION: IP 68.
• STANDARD FEATURES:
D (single-phase) Float switch.
Neoprene power cable “H07 RN-F”
length 15 ft
D (three-phase) Neoprene power cable “H07 RN-F”
length 15 ft
|
OPTIONS ON REQUEST |
• 30 ft power cable.
N.B. required for outdoor use to comply with standard EN 60335-2-41
• control box for three-phase pumps 1.0 Hp
• single-phase pumps without float switch
• other voltages or frequency 50 Hz |
|
![.](images/spacer.gif"){kind=spacer}
