RANGE OF PERFORMANCE |
Flow rate up to 40 gpm
Head up to 442 ft |
LIMITS OF USE |
Liquid temperature up to +86°F
Submersion depth up to 131 feet |
INSTALLATION AND USE |
| THEY ARE RECOMMENDED FOR PUMPING CLEAN WATER DUE TO THEIR HIGH EFFICIENCY AND RELIABILITY, THEY ARE RECOMMENDED FOR DOMESTIC WATER SUPPLIES AS PART OF A PRESSURE SET, OR FOR IRRIGATION. |
|
|
CONSTRUCTION CHARACTERISTICS |
• DELIVERY BODY: stainless steel AISI 304 with threaded port.
• CASE: stainless steel AISI 304.
• IMPELLERS AND DIFFUSERS: technopolymer.
• DIFFUSER HOUSING: stainless steel AISI 304.
• PUMP SHAFT: stainless steel AISI 304.
• PUMP BEARINGS: housing in special technopolymer with stainless steel AISI 316 shaft bushes, chrome oxide coated to resist sand.
• DRIVE COUPLING: stainless steel AISI 316L.
• SCREWS AND CABLE COVER: stainless steel AISI 304.
• MOTOR SHAFT: stainless steel AISI 316
(EN 10088-3 - 1.4104 up to 0.7 HP).
• MOTOR: submersible for continuous duty (dry rewindable).
4BLOCK: single-phase 230 V - 60 Hz.
4BLOCK: three-phase 230 V - 60 Hz.
• INSULATION: class F.
• PROTECTION: IP 68.
• DOUBLE SEAL: mechanical seal ceramic - graphite - NBR with oil barrier chamber and inner lip seal to protect the seal in the event of dry running.
• STANDARD FEATURES:
4BLOCK (single-phase) Motor thermal protection built into the
winding. Internal capacitor.
65 ft flat power cable.
4BLOCK (three-phase) 65 ft flat power cable. |
OPTIONS ON REQUEST |
• 100 ft power cable
• other voltages or frequency 50 Hz |
|
![.](images/spacer.gif"){kind=spacer}
